Design & Reuse
90 IP
51
1.0
RF Transconductance Amplifier - GlobalFoundries 22nm
RF Transconductance Amplifier - GlobalFoundries 22nm...
52
1.0
VHF/ UHF/L (DVB-H, DMB and ISDB-T) RF Front-end
The NT1022 is multiband multistandard direct-conversion TV tuner designed for Mobile Digital TV applications. The TV tuner supports DVB-H, DVB-T, IP-D...
53
1.0
Wifi Receiver, 2402-2480 MHz - GlobalFoundries 22nm
Wifi Receiver, 2402-2480 MHz - GlobalFoundries 22nm...
54
1.0
Wireline Transceiver
This IP can be used for BPSK RF communication through a signal wire. Originally it was designed for use with V1 USB PD. However, it is a generic block...
55
1.0
Bluetooth Low Energy (BLE) RF IP
The VeriSilicon Bluetooth Low Energy (BLE) RF IP is a 2.4GHz ISM band transceiver which is designed for Bluetooth Smart or IEEE 802.15.4 based applica...
56
1.0
Bluetooth Low Energy (BLE) RF IP
Bluetooth Low Energy (BLE) RF IP provides a transceiver designed for Bluetooth Smart applications. It is compliant with the BLE specification (part of...
57
1.0
Complete RF Transceiver 5.8GHz
Complete RF Transceiver 5.8GHz...
58
1.0
CoreFE: RF Front-End - GlobalFoundries 130nm RFSOI
CoreFE: RF Front-End - GlobalFoundries 130nm RFSOI...
59
1.0
CoreLTEFE: RF Front-End for LTE mid-band application - GlobalFoundries 130nm RFSOI
CoreLTEFE: RF Front-End for LTE mid-band application - GlobalFoundries 130nm RFSOI...
60
1.0
Programmable RF attennuator - GlobalFoundries 130nm RFSOI
Programmable RF attennuator - GlobalFoundries 130nm RFSOI...
61
0.0
6 Mhz to 5.8Ghz RF Power Amplifer
The CC-204IP Wideband Power Amplifier is a paralleled, multi-stage RF Power Amplifier that possesses a variable 6Mhz to 5.8Ghz output frequency range ...
62
0.0
E-Band Front-End Module 71 GHz to 86 GHz
The WEA7186F55 is a front end for wireless microwave transceivers operating in the E-Band. Implemented in a ST Micro Silicon Germanium B55 process. Th...
63
0.0
1220 to 1610 MHz Image-rejection mixer
The mixer intended to perform a simultaneous RF signal carry, down conversion and image rejection. The block is fabricated on AMS BiCMOS 0.35 um tech...
64
0.0
1220 to 1610 MHz mixer
The mixer based on Gilbert cell and converts RF frequency to a low intermediate frequency. Buffer amplifier is used to improve qualitative character...
65
0.0
130 to 935 MHz Quadrature down mixer
Quadrature mixer is based on Gilbert cells and consists of two double-balanced mixers converting RF frequency to a low intermediate frequency (IF). An...
66
0.0
76 GHZ to 81 GHz LNA Phase Array
The WEA7681L130 consists of phase array element of 4 LNAs and a combiner. Each LNA has 3 stages. The WEA7681L130 functions as a MUX. Every LNA stage c...
67
0.0
065TSMC_MIX_11 - 1 to 100 MHz up-conversion mixer
065TSMC_MIX_11 is used to transfer incoming useful intermediate-frequency signal (IF) to high frequencies (RF). Quadrature mixer consists of two doubl...
68
0.0
76GHz to 81GHz Single Ended Transmitter
The WEA7681T22G is a mmWave transmitter for FMCW Radar applications covering the 76 GHz to 81 GHz automotive frequency band. The WEA7681T22G consists ...
69
0.0
Bandgap Voltage Reference 500mV/1.14V High Precision
The WEA05114BG45G is a high precision band gap reference voltage that provides a 500 mV and a 1.14 V output from inputs between 1.8 V and 3.0 V. It is...
70
0.0
Active frequency doubler, designed for use in the LO Path after VCO to double up the LO frequency
RFDBL03C is an active frequency doubler, designed for use in the LO Path after VCO to double up the LO frequency within the IC to feed in and drive th...
71
0.0
Active frequency doubler, designed for use in the LO Path after VCO to double up the LO frequency
RFDBL04C is an active frequency doubler, designed for use in the LO Path after VCO to double up the LO frequency within the IC to feed in and drive th...
72
0.0
RF Counter, 8b
RF Counter, 8b, up to 10GHz, Idd=600uA...
73
0.0
RF IO Pad Set
The RF libraries include analog signal pads and ESD protection components for RF applications. Analog / RF cells  Low voltage LNA input pad (1.0V) ...
74
0.0
RF IO Pad Set
The RF libraries include analog signal pads and ESD protection components for RF applications. Analog / RF cells * Low voltage LNA input pad (1....
75
0.0
RF Multiply by 2, 20GHz to 40GHz
RF Multiply by 2, 20GHz to 40GHz, Vdd=800mV, Idd=5mA...
76
0.0
RF Multiply by 2, 40GHz to 80GHz
RF Multiply by 2, 40GHz to 80GHz,VDD=800mV, Idd=5mA...
77
0.0
RF SP3T Switch used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation
RFSW02C RF SP3T Switch is used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation....
78
0.0
RF SPDT Switch from 10-30 GHz used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation
RFSW01C RF SPDT Switch is used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation....
79
0.0
RF SPDT Switch from 2-44 GHz used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation
RFSW03C RF SPDT Switch is used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation....
80
0.0
RF SPDT Switch from 20-40 GHz used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation
RFSW05C RF SPDT Switch is used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation....
81
0.0
RF SPDT Switch from 20-40 GHz used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation
RFSW04C RF SPDT Switch is used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation....
82
0.0
IGARFCT01A, TSMC CLN28HPM 40MHz Resistance to Frequency Converter
The IGARFCT01A is a 40MHz high frequency stability resistance to frequency converter (RFC) without external component. It is designed to provide a sta...
83
0.0
IGARFCT02A, TSMC CLN28HPM 1MHz Resistance to Frequency Converter
The IGARFCT02A is a 1MHz resistance to frequency converter (RFC) without external component. It is designed to provide a stable and accurate reference...
84
0.0
6Mhz to 5.8Ghz wideband half and full wave rectifier
The CC-205IP Wideband CMOS RF Rectifier is a CMOS full wave rectifier with a 6Mhz to 5.8Ghz rectification frequency range capability, can rectify inpu...
85
0.0
DNC IR SSB Mixer used in transceiver applications
RFDN03C (DNC Mixer) is IR SSB Mixer used in transceiver application. The process used to design DNC Mixer is 0.1um GaAs pHEMT. This Mixer employs two ...
86
0.0
Downconverter IR SSB Mixer used in receives
RFDN02C (DNC Mixer) is IR SSB Mixer used in receive application. The process used to design DNC Mixer is 0.1um GaAs pHEMT. This Mixer employs two resi...
87
0.0
Up convert LO reject Mixer used in RF transceiver applications
RFUD01C (UPC Mixer) is LO reject Mixer used in RF transceiver applications. The process used to design UPC Mixer is 0.1um GaAs pHEMT. This is singly b...
88
0.0
Programmable Low Pass Filter
The WEA50175LPF18CH322G is a leapfrog low pass filter with programmable cut-off frequency. The filter response is 3rd order Chebyschev. The low pass f...
89
0.0
Front End Module operating from 2 – 7 GHz and can be used in S / C band for Wi-Fi 6 & SATCOM applications.
RFFEM02C Front End Module operates from 2 – 7 GHz and can be used in S / C for Wi-Fi 6 & SATCOM applications. The input and output are matched to 50 o...
90
0.0
Front End Module operating from 24 – 30 GHz and can be used in low power Ka band applications
RFFEM01C Front End Module operates from 24 – 30 GHz and can be used in low power Ka band application. The input and output are matched to 50 ohms with...